Verification and Validation with edits by Dan Fleck Coming

Verification and Validation with edits by Dan Fleck Coming up: Objectives Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 1

Objectives To introduce software verification and validation and to discuss the distinction between them To describe the program inspection process and its role in V & V To explain static analysis as a verification technique Coming up: Topics covered Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 2

Topics covered Verification and validation planning Software inspections Automated static analysis Coming up: Verification vs validation Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 3

Verification vs validation Verification: "Are we building the product right”. The software should conform to its specification. Validation: "Are we building the right product”. Coming up: The V & V process The software should do what the user really wants. Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 4

The V & V process Is a whole life-cycle process - V & V must be applied at each stage in the software process. Has two principal objectives Coming up: V & V goals The discovery of defects in a system; The assessment of whether or not the system is useful and useable in an operational situation. Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 5

V & V goals Verification and validation should establish confidence that the software is fit for purpose. This does NOT mean completely free of defects. Rather, it must be good enough for its intended use and the type of use will determine the degree of confidence that is needed. Coming up: V & V confidence Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 6

V & V confidence Depends on system’s purpose, user expectations and marketing environment Software function The level of confidence depends on how critical the software is to an organisation. User expectations Users may have low expectations of certain kinds of software. Marketing environment Getting a product to market early may be more important than finding defects in the program. Coming up: IV & V: Independent Validation Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 7

IV & V: Independent Validation and Verification Can be done by another internal team or external (other company) developer Understands the system but, will test "gently" and, is driven by "delivery" Coming up: Static and dynamic verification independent tester Must learn about the system, but, will attempt to break it and, is driven by quality Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 8

Static and dynamic verification Software inspections. Concerned with analysis of the static system representation to discover problems (static verification) May be supplement by tool-based document and code analysis Software testing. Concerned with exercising and observing product behaviour (dynamic verification) The system is executed with test data and its operational behaviour is observed Coming up: Static and dynamic V&V Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 9

Static and dynamic V&V QuickTime and a decompressor are needed to see this picture. Coming up: Program testing Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 10

Program testing Can reveal the presence of errors NOT their absence. The only validation technique for nonfunctional requirements is the software has to be executed to see how it behaves. Should be used in conjunction with static verification to provide full V&V coverage. Coming up: Types of testing Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 11

Types of testing Defect testing Tests designed to discover system defects. A successful defect test is one which reveals the presence of defects in a system. Covered in next lecture Validation testing Intended to show that the software meets its requirements. A successful test is one that shows that a requirements has been properly implemented. Coming up: Testing and debugging Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 12

Testing and debugging Defect testing and debugging are distinct processes. Verification and validation is concerned with establishing the existence of defects in a program. Debugging is concerned with locating and repairing these errors. Debugging involves formulating a hypothesis about program behaviour then testing these hypotheses to find the system error. Coming up: The debugging process Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 13

The debugging process QuickTime and a decompressor are needed to see this picture. Coming up: Debugging Techniques Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 14

Debugging Techniques brute force backtracking Cause elimination When all else fails, ask for help! Coming up: V & V planning Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 15

V & V planning Careful planning is required to get the most out of testing and inspection processes. Planning should start early in the development process. The plan should identify the balance between static verification and testing. Test planning is about defining standards for the testing process rather than describing product tests. Coming up: The V-model of development Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 16

The V-model of development QuickTime and a decompressor are needed to see this picture. Coming up: The structure of a software test Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 17

The structure of a software test plan The testing process. Requirements traceability. Tested items. Testing schedule. Test recording procedures. Hardware and software requirements. Constraints. Coming up: The software test plan Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 18

The software test plan Coming up: Software inspections Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 19

Software inspections These involve people examining the source representation with the aim of discovering anomalies and defects. Inspections do not require execution of a system so may be used before implementation. They may be applied to any representation of the system (requirements, design,configuration data, test data, etc.). They have been shown to be an effective technique for discovering program errors. Coming up: Inspection success Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 20

Inspection success Many different defects may be discovered in a single inspection. In testing, one defect may mask another so several executions are required. Reuse and programming patterns are common so reviewers are likely to have seen the types of error that commonly arise. Coming up: Inspections and testing Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 21

Inspections and testing Inspections and testing are complementary and not opposing verification techniques. Both should be used during the V & V process. Inspections can check conformance with a specification but not conformance with the customer’s real requirements. Inspections cannot check non-functional characteristics such as performance, usability, etc. Coming up: Program inspections Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 22

Program inspections Formalised approach to document reviews Intended explicitly for defect detection (not correction). Defects may be logical errors, anomalies in the code that might indicate an erroneous condition (e.g. an uninitialised variable) or non-compliance with standards. Coming up: Inspection pre-conditions Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 23

Inspection pre-conditions A precise specification must be available. Team members must be familiar with the organisation standards. Syntactically correct code or other system representations must be available. An error checklist should be prepared. Management must accept that inspection will increase costs early in the software process. Management should not use inspections for staff appraisal ie finding out who makes mistakes. Coming up: The inspection process Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 24

The inspection process QuickTime and a decompressor are needed to see this picture. Coming up: Inspection procedure Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 25

Inspection procedure System overview presented to inspection team. Code and associated documents are distributed to inspection team in advance. Inspection takes place and discovered errors are noted. Modifications are made to repair discovered errors. Re-inspection may or may not be required. Coming up: Inspection roles Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 26

Inspection checklists Checklist of common errors should be used to drive the inspection. Error checklists are programming language dependent and reflect the characteristic errors that are likely to arise in the language. In general, the 'weaker' the type checking, the larger the checklist. Examples: Initialisation, Constant naming, loop termination, array bounds, etc. Coming up: Inspection checks 1 Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 27

Inspection checks 1 Coming up: Inspection checks 2 Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 28

Inspection checks 2 Coming up: Inspection rate Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 29

Inspection rate 500 statements/hour during overview. 125 source statement/hour during individual preparation. 90-125 statements/hour can be inspected. Inspection is therefore an expensive process. Inspecting 500 lines costs about 40 man/hours effort - about 2800 at UK rates. Coming up: Automated static analysis Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 30

Automated static analysis Static analysers are software tools for source text processing. They parse the program text and try to discover potentially erroneous conditions and bring these to the attention of the V & V team. They are very effective as an aid to inspections - they are a supplement to but not a replacement for inspections. Coming up: Static analysis checks Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 31

Static analysis checks Coming up: Stages of static analysis Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 32

Stages of static analysis Control flow analysis. Checks for loops with multiple exit or entry points, finds unreachable code, etc. Data use analysis. Detects uninitialised variables, variables written twice without an intervening assignment, variables which are declared but never used, etc. Coming up: Stages of static analysis Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 33

Stages of static analysis Information flow analysis. Identifies the dependencies of output variables. Does not detect anomalies itself but highlights information for code inspection or review Path analysis. Identifies paths through the program and sets out the statements executed in that path. Again, potentially useful in the review process Both these stages generate vast amounts of information. They must be used with care. Coming up: LINT static analysis Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 34

LINT static analysis Coming up: Static Analysis Tools Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 35

Static Analysis Tools FindBugs - Finds MANY categories of bugs Checkstyle - coding standard violations PMD - Maybe a lot more, but seems to be mainly unused variables it seems, also cut-npaste code. Jamit - Java Access Modifier Inference Tool - find tighter access modifiers Coming up: Verification and formal methods Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 36

Verification and formal methods Formal methods can be used when a mathematical specification of the system is produced. They are the ultimate static verification technique. They involve detailed mathematical analysis of the specification and may develop formal arguments that a program conforms to its mathematical specification. Coming up: Arguments for formal methods Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 37

Arguments for formal methods Producing a mathematical specification requires a detailed analysis of the requirements and this is likely to uncover errors. They can detect implementation errors before testing when the program is analyzed alongside the specification. Coming up: Arguments against formal Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 38

Arguments against formal methods Require specialized notations that cannot be understood by domain experts. Very expensive to develop a specification and even more expensive to show that a program meets that specification. It may be possible to reach the same level of confidence in a program more cheaply using other V & V techniques. Formal specification using a state transition model. Incremental development where the customer prioritises increments. Structured programming - limited control and abstraction constructs are used in the program. Static verification using rigorous inspections. Statistical testing of the system. Coming up: Key points Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 39

Key points Verification and validation are not the same thing. Verification shows conformance with specification; validation shows that the program meets the customer’s needs. Test plans should be drawn up to guide the testing process. Static verification techniques involve examination and analysis of the program for error detection. Coming up: Key points Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 40

Key points End of presentation Program inspections are very effective in discovering errors. Program code in inspections is systematically checked by a small team to locate software faults. Static analysis tools can discover program anomalies which may be an indication of faults in the code. Ian Sommerville 2004 -- Software Engineering, 7th edition. Chapter 22 Slide 41