Optimization Methods

70 Slides6.05 MB

Optimization Methods

Decision making Examples: determining which ingredients and in what quantities to add to a mixture being made so that it will meet specifications on its composition allocating available funds among various competing agencies deciding which route to take to go to a new location in the city Decision making always involves making a choice between various possible alternatives

Categories of Decision making problems Category 1: The set of possible alternatives for the decision is a finite discrete set typically consisting of a small number of elements. – Example: “A teenage girl knows four boys all of whom she likes, and has to decide who among them to go steady with.” Solution: scoring methods Category 2: The number of possible alternatives is either infinite, or finite but very large, and the decision may be required to satisfy some restrictions and constraints Solution: unconstrained and constrained optimization methods

The scoring method – an example Rita has been dating 4 boys off and on over the last 3 years, and has come to know each of them very well. Who among the four boys would be her best choice?

Category 2 Decision problems 1. Get a precise definition of the problem, all relevant data and information on it. Uncontrollable factors (random variables) Controllable inputs (decision variables) 2. Construct a mathematical (optimization) model of the problem. Build objective functions and constraints 3. Solve the model Apply the most appropriate algorithms for the given problem 4. Implement the solution

Optimization models Single x Multiobjective models Static x Dynamic models Deterministic x Stochastic models

Problem specification Suppose we have a cost function (or objective function) Our aim is to find values of the parameters (decision variables) x that minimize this function Subject to the following constraints: equality: nonequality: If we seek a maximum of f(x) (profit function) it is equivalent to seeking a minimum of –f(x)

Books to read Practical Optimization – Philip E. Gill, Walter Murray, and Margaret H. Wright, Academic Press, 1981 Practical Optimization: Algorithms and Engineering Applications – Andreas Antoniou and Wu-Sheng Lu 2007 Both cover unconstrained and constrained optimization. Very clear and comprehensive.

Further reading and web resources Numerical Recipes in C (or C ) : The Art of Scientific Computing – William H. Press, Brian P. Flannery, Saul A. Teukolsky, William T. Vetterling – Good chapter on optimization – Available on line at (1992 ed.) www.nrbook.com/a/bookcpdf.php (2007 ed.) www.nrbook.com NEOS Guide www-fp.mcs.anl.gov/OTC/Guide/ This powerpoint presentation www.utia.cas.cz

Types of minima f(x) strong local minimum weak local minimum strong global minimum feasible region strong local minimum x which of the minima is found depends on the starting point such minima often occur in real applications

Unconstrained univariate optimization Assume we can start close to the global minimum How to determine the minimum? Search methods (Dichotomous, Fibonacci, Golden-Section) Approximation methods 1. Polynomial interpolation 2. Newton method Combination of both (alg. of Davies, Swann, and Campey)

Search methods Start with the interval (“bracket”) [xL, xU] such that the minimum x* lies inside. Evaluate f(x) at two point inside the bracket. Reduce the bracket. Repeat the process. Can be applied to any function and differentiability is not essential.

Search methods xU xL xL xL xU Dichotomous 1 2 3 xL xL 5 8 xU Fibonacci: 1 1 2 3 5 8 xU xU

1D function As an example consider the function (assume we do not know the actual function expression from now on)

Gradient descent Given a starting location, x0, examine df/dx and move in the downhill direction to generate a new estimate, x1 x0 δx How to determine the step size δx?

Polynomial interpolation Bracket the minimum. Fit a quadratic or cubic polynomial which interpolates f(x) at some points in the interval. Jump to the (easily obtained) minimum of the polynomial. Throw away the worst point and repeat the process.

Polynomial interpolation Quadratic interpolation using 3 points, 2 iterations Other methods to interpolate? – 2 points and one gradient – Cubic interpolation

Newton method Fit a quadratic approximation to f(x) using both gradient and curvature information at x. Expand f(x) locally using a Taylor series. Find the δx which minimizes this local quadratic approximation. Update x.

Newton method avoids the need to bracket the root quadratic convergence (decimal accuracy doubles at every iteration)

Newton method Global convergence of Newton’s method is poor. Often fails if the starting point is too far from the minimum. in practice, must be used with a globalization strategy which reduces the step length until function decrease is assured

Extension to N (multivariate) dimensions How big N can be? – problem sizes can vary from a handful of parameters to many thousands We will consider examples for N 2, so that cost function surfaces can be visualized.

An Optimization Algorithm Start at x0, k 0. 1. Compute a search direction pk 2. Compute a step length αk, such that f(xk αk pk ) f(xk) k k 1 3. Update xk xk αk pk 4. Check for convergence (stopping criteria) e.g. df/dx 0 Reduces optimization in N dimensions to a series of (1D) line minimizations

Taylor expansion A function may be approximated locally by its Taylor series expansion about a point x* where the gradient is the vector and the Hessian H(x*) is the symmetric matrix

Quadratic functions The vector g and the Hessian H are constant. Second order approximation of any function by the Taylor expansion is a quadratic function. We will assume only quadratic functions for a while.

Necessary conditions for a minimum Expand f(x) about a stationary point x* in direction p since at a stationary point At a stationary point the behavior is determined by H

H is a symmetric matrix, and so has orthogonal eigenvectors As α increases, f(x* αui) increases, decreases or is unchanging according to whether λi is positive, negative or zero

Examples of quadratic functions Case 1: both eigenvalues positive with minimum positive definite

Examples of quadratic functions Case 2: eigenvalues have different sign with saddle point indefinite

Examples of quadratic functions Case 3: one eigenvalues is zero with parabolic cylinder positive semidefinite

Optimization for quadratic functions Assume that H is positive definite There is a unique minimum at If N is large, it is not feasible to perform this inversion directly.

Steepest descent Basic principle is to minimize the N-dimensional function by a series of 1D line-minimizations: The steepest descent method chooses pk to be parallel to the gradient Step-size αk is chosen to minimize f(xk αkpk). For quadratic forms there is a closed form solution: Prove it!

Steepest descent The gradient is everywhere perpendicular to the contour lines. After each line minimization the new gradient is always orthogonal to the previous step direction (true of any line minimization). Consequently, the iterates tend to zig-zag down the valley in a very inefficient manner

Conjugate gradient Each pk is chosen to be conjugate to all previous search directions with respect to the Hessian H: The resulting search directions are mutually linearly independent. Prove it! Remarkably, pk can be chosen using only knowledge of pk-1, , and

Conjugate gradient An N-dimensional quadratic form can be minimized in at most N conjugate descent steps. 3 different starting points. Minimum is reached in exactly 2 steps.

Optimization for General functions Apply methods developed using quadratic Taylor series expansion

Rosenbrock’s function Minimum at [1, 1]

Steepest descent The 1D line minimization must be performed using one of the earlier methods (usually cubic polynomial interpolation) The zig-zag behaviour is clear in the zoomed view The algorithm crawls down the valley

Conjugate gradient Again, an explicit line minimization must be used at every step The algorithm converges in 98 iterations Far superior to steepest descent

Newton method Expand f(x) by its Taylor series about the point xk where the gradient is the vector and the Hessian is the symmetric matrix

Newton method For a minimum we require that with solution , and so . This gives the iterative update If f(x) is quadratic, then the solution is found in one step. The method has quadratic convergence (as in the 1D case). The solution is guaranteed to be a downhill direction. Rather than jump straight to the minimum, it is better to perform a line minimization which ensures global convergence If H I then this reduces to steepest descent.

Newton method - example The algorithm converges in only 18 iterations compared to the 98 for conjugate gradients. However, the method requires computing the Hessian matrix at each iteration – this is not always feasible

Summary of the 1st lecture Minimization of 1-D functions – Search methods – Approximation methods N-D functions - finding the descent direction Taylor series - Quadratic functions Steepest descent Conjugate Gradient Newton method

Quasi-Newton methods If the problem size is large and the Hessian matrix is dense then it may be infeasible/inconvenient to compute it directly. Quasi-Newton methods avoid this problem by keeping a “rolling estimate” of H(x), updated at each iteration using new gradient information. Common schemes are due to Broyden, Goldfarb, Fletcher and Shanno (BFGS), and also Davidson, Fletcher and Powell (DFP). The idea is based on the fact that for quadratic functions holds and by accumulating gk’s and xk’s we can calculate H.

Quasi-Newton BFGS method Set H0 I. Update according to where The matrix inverse can also be computed in this way. Directions δk‘s form a conjugate set. The estimate Hk is used to form a local quadratic approximation as before Hk 1 is positive definite if Hk is positive definite.

BFGS example The method converges in 34 iterations, compared to 18 for the full-Newton method

Non-linear least squares It is very common in applications for a cost function f(x) to be the sum of a large number of squared residuals If each residual depends non-linearly on the parameters x then the minimization of f(x) is a non-linear least squares problem.

Non-linear least squares The M N Jacobian of the vector of residuals r is defined as Consider Hence

Non-linear least squares For the Hessian holds Gauss-Newton approximation Note that the second-order term in the Hessian is multiplied by the residuals ri. In most problems, the residuals will typically be small. Also, at the minimum, the residuals will typically be distributed with mean 0. For these reasons, the second-order term is often ignored. Hence, explicit computation of the full Hessian can again be avoided.

Gauss-Newton example The minimization of the Rosenbrock function can be written as a least-squares problem with residual vector

Gauss-Newton example minimization with the Gauss-Newton approximation with line search takes only 11 iterations

Comparison CG Quasi-Newton Newton Gauss-Newton

Simplex

Constrained Optimization Subject to: Equality constraints: Nonequality constraints: Constraints define a feasible region, which is nonempty. The idea is to convert it to an unconstrained optimization.

Equality constraints Minimize f(x) subject to: for The gradient of f(x) at a local minimizer is equal to the linear combination of the gradients of ai(x) with Lagrange multipliers as the coefficients.

f3 f2 f1 f 3 f 2 f1 x* is a minimizer, λ* 0 is not a minimizer x* is a minimizer, λ* 0 f 3 f2 f 1 x* is not a minimizer

3D Example

3D Example f(x) 3 Gradients of constraints and objective function are linearly independent.

3D Example f(x) 1 Gradients of constraints and objective function are linearly dependent.

Inequality constraints Minimize f(x) subject to: for The gradient of f(x) at a local minimizer is equal to the linear combination of the gradients of cj(x), which are active ( cj(x) 0 ) and Lagrange multipliers must be positive,

f3 f2 f1 f3 f 2 f1 x* is not a minimizer, μ 0 No active constraints at x*, f 3 f2 f 1 x* is a minimizer, μ 0

Lagrangien We can introduce the function (Lagrangien) The necessary condition for the local minimizer is and it must be a feasible point (i.e. constraints are satisfied). These are Karush-Kuhn-Tucker conditions

Quadratic Programming (QP) Like in the unconstrained case, it is important to study quadratic functions. Why? Because general nonlinear problems are solved as a sequence of minimizations of their quadratic approximations. QP with constraints Minimize subject to linear constraints. H is symmetric and positive semidefinite.

QP with Equality Constraints Minimize Subject to: Ass.: A is p N and has full row rank (p N) Convert to unconstrained problem by variable elimination: Z is the null space of A A is the pseudo-inverse. Minimize This quadratic unconstrained problem can be solved, e.g., by Newton method.

QP with inequality constraints Minimize Subject to: First we check if the unconstrained minimizer is feasible. If yes we are done. If not we know that the minimizer must be on the boundary and we proceed with an active-set method. xk is the current feasible point is the index set of active constraints at xk Next iterate is given by

Active-set method How to find dk? – To remain active thus – The objective function at xk d becomes where The major step is a QP sub-problem subject to: Two situations may occur: or

Active-set method We check if KKT conditions are satisfied and If YES we are done. If NO we remove the constraint from the active set with the most negative and solve the QP sub-problem again but this time with less active constraints. We can move to but some inactive constraints may be violated on the way. In this case, we move by till the first inactive constraint becomes active, update , and solve the QP sub-problem again but this time with more active constraints.

General Nonlinear Optimization Minimize subject to: f(x) where the objective function and constraints are nonlinear. 1. 2. 3. 4. 5. For a given approximate Lagrangien by Taylor series QP problem Solve QP descent direction Perform line search in the direction Update Lagrange multipliers Repeat from Step 1.

General Nonlinear Optimization Lagrangien At the kth iterate: and we want to compute a set of increments: First order approximation of and constraints: These approximate KKT conditions corresponds to a QP program

SQP example Minimize subject to:

Linear Programming (LP) LP is common in economy and is meaningful only if it is with constraints. Two forms: 1. Minimize subject to: 2. Minimize subject to: A is p N and has full row rank (p N) Prove it! QP can solve LP. If the LP minimizer exists it must be one of the vertices of the feasible region. A fast method that considers vertices is the Simplex method.

Back to top button